ZestBlog

3 / 5

Lightweight Rain Protection Window Well Cover

Keep out rain and let in light with this simple cover, made from PVC pipe and clear polycarbonate roofing.

For the frame, glue 1- or 1-1/2-in. PVC pipe and fittings together with PVC cement. Use elbows for the front of the frame and tees for the back, then glue short lengths of pipe into the tees. These rest on the ground or the side of the window well, raise the back and make a slope.

Cut the roofing to size with a jigsaw or circular saw; choose a blade with a high tooth count. Then fasten it to the pipe with self-drilling roofing screws.

4 / 5

Well-Ventilated Egress Window Well Cover

This stay-in-place egress cover keeps out rain while providing ventilation and plenty of space on the uncovered sides. You’ll need 2x4s and corrugated plastic roofing.

Build two identical right-angle triangles about four feet high with bases that extend to the front of the well. Screw the triangles to the top of the well and the siding, then join them by screwing three or four evenly spaced 1x4s to them. Fasten clear corrugated roofing to the 1x4s with weathertight roofing screws.

5 / 5

Simple Acrylic Window Well Cover

If you have a galvanized steel window well with a semicircular cross-section, you can probably find a pre-fab cover for it. If not, here’s how to make your own.

Purchase a half-sheet of 1/4-in. acrylic (it’s cheaper than plexiglass). Set it on top of the well, trace the outline and cut with a jigsaw. Slit some clear flexible tubing lengthwise with a knife and fit it over the edges of the acrylic. This gives the cover a finished look. Set this on the well or attach it to the siding with hinges.

ncG1vNJzZmivp6x7p63MoqOyoJGjsbq5wKdlnKedZLmqv9Nom6KxXay2r7DOsGSwnZyheqS71Z6paA%3D%3D